1. Ensure the machine is plugged in.

2. Check out the fuse breaker switch.

3. Press the rocker switch to the right so that the red light and the thermostat monitor turns on.

4. The temperature must be 100 degrees adjusted by the technician. You do not need to change the temperature. Please wait till the temperature reaches to the desired level.

5. Turn the rocker switch from zero to number one, then start the machine.

6. Pour the material into the hopper gradually and start the oil extraction process.

Note: please note that you must turn on the machine prior to pouring the materials into the hopper.

It is worth noting that if the machines starts working, turn the rocker switch to the left (for 3 seconds), so that the materials pass through the cylinder and the screw moves easily.