1. single phase grinders operate by just plugging the grinder into the socket.

However, if you would like to operatea three-phase grinder, you must ask an electrician for help to operate the machine.

2. put the screen in its right position.

 3. check out the rotational direction of the three spinner and the butterfly (it has been mentioned already).

4. close the lid of the machine and tighten the bolts firmly.

5. If the grinder has vacuum cyclone,  fasten the cyclone step by step (it is mentioned further).

6. mount the bag carefully. Make sure the rubber band is placed inside the groove.

7. close the lid of the hopper so that the material will not enter the grinder. Switch on the grinder.

Pour the seeds into the chamber.

Open the air valve (coin air valve).

Open the hopper valve slowly so that the materials enter the grinder slowly and bit by bit. (if you would like the grinder to work automatically, you must use the vibrating hopper and the vacuuum system)

8. check out if the grinder body is not hot and under pressure. If the grinder is hot, switch off the machine for 5 minutes and let it cool down.

Taking the amount of materials entering the grinder into consideration, helps the machine work without being under pressure and making rumbling noise.

9. having all the materials entered the grinder, please wait for 10 seconds so that all the materials will be ground. Then switch off the machine.

10. after the grinding process is done, clean the inside part of the bowl with a brush.

Note: avoid pouring greasy and wet seeds into the machine such as sesame, fennel flower, caraway or coriander.

Horsepower: is the unit of measurement of engine power and is shown as (hp).