How to Take Apart and Clean the Cold Oil Press Machine Caliber 40, 60, and 110
Before taking apart and cleaning the machine, please make sure you have unplugged the machine. While assembling the machine, make sure there are not any sesame seeds or oil cake between the parts of the machine (especially between the blade and the nozzle); otherwise, the oil will be leaking from different parts of the machine […]
Extraction Methods from Different Plant Seeds
Nozzle number Seed moisture content Machine temperature Ball screw rotation Oil seeds 8 & 10 1% 90 degrees Midway and then quarter way flaxseed 8 – 95 degrees Between halfway and quarter way walnuts 10 1% this year seeds 2% last year seeds 95 degrees Between halfway and quarter way Sweet almond 10 1% this […]
Cold Oil Press Machine Caliber 40 Maintenance Tips
Caution 1- wait till the temperature reaches 95 and then operate the machine. Caution 2- before switching off the machine, please wait till the element temperature comes down. Caution 3- at the end of the oil extraction process, pour damp sesame into the hopper (3% humidity). The damp sesame cleans the screw and the cylinder, […]
How to Operate the Cold Oil Press Machine Caliber 40
First, adjust the ball screw. Then fasten the element. Fasten the thermocable or the temperature sensor. Adjust the thermostat. The machine is ready to operate. Turn on the element switch. After that, the red light turns on. Please wait till the temperature turns to 100 degrees. Pour the seeds into the hopper and adjust the […]
How to Assemble the Cold Oil Press Machine Caliber 40 After the Cleaning Process
Assemble the equipment after the cleaning process in order: cylinder, screw, blade, nut, ball screw, nozzle, nozzle makerbot. 1. Assemble the cylinder by turning it anticlockwise. Note: all the bolts and grooves of the machine are assembled clockwise, however the cylinder is assembled anticlockwise. 2. There is a jag at the end of the screw; […]
How to Assemble and Take Apart DK 22 Cold Oil Press Machine
How to assemble DK 22 cold press oil machine: 1. Place the screw inside according to its grooves. 2. Put the cylinder into the jag position on the screw, and fasten it tightly. 3. Then fasten the pin. How to take apart DK 22 cold press oil machine: 1. Remove the chamber. 2. Lift the […]
How to Operate DK 22 Cold Press Oil Machine
1. Ensure the machine is plugged in. 2. Check out the miniature circuit breaker. 3. Press the rocker switch to the right so that the red light and the thermostat monitor turns on. 4. The temperature must be between 120 and 150 degrees adjusted by the technician. You do not need to change the temperature. […]
Stuff You Should Know About the Oil Seeds Before Oil Extraction Process
Dampen the oil seeds that are the products of a year ago. During the coconut oil extraction process, if the press cake is greasy, fasten the ball screw firmly. Dampen the almonds a day before oil extraction and cover them with cloth. dampen the hemp seeds two times in a row. For the first time, […]