How to Assemble the Cold Oil Press Machine Caliber 40 After the Cleaning Process
Assemble the equipment after the cleaning process in order: cylinder, screw, blade, nut, ball screw, nozzle, nozzle makerbot. 1. Assemble the cylinder by turning it anticlockwise. Note: all the bolts and grooves of the machine are assembled clockwise, however the cylinder is assembled anticlockwise. 2. There is a jag at the end of the screw; […]
How to Assemble and Take Apart DK 22 Cold Oil Press Machine
How to assemble DK 22 cold press oil machine: 1. Place the screw inside according to its grooves. 2. Put the cylinder into the jag position on the screw, and fasten it tightly. 3. Then fasten the pin. How to take apart DK 22 cold press oil machine: 1. Remove the chamber. 2. Lift the […]
How to Assemble and Take Apart DK 28 Cold Press Oil Machine
How to assemble DK 28 cold oil press machine: 1. Place the screw inside according to its grooves. 2. Put the screw inside the gearbox. 3. Fasten the bolts. 4. Assemble the element and the sensor. It is worth noting that there is a large bolt behind the machine to adjust the screw. This bolt […]